Every jar of Buzz & Bloom honey starts with our hives located across North Yorkshire and Teesside, where our bees spend months gathering nectar from the surrounding hedgerows, gardens and countryside.
In late summer, some of our hives make their annual journey to the North Yorkshire heather moors, where the bees spend around a month foraging while the heather is in bloom. In early autumn, we bring the hives back from the moors to our home field and the honey extraction process begins. This is what we did earlier this week.
First things first: uncapping the honey
Once the hives are back, we carefully remove the frames filled with capped honeycomb. When the honey is ready, the bees seal each cell with a thin layer of wax. Before we can extract the honey, these wax caps need to be removed.
We used to uncap every frame by hand using a metal uncapping tool. It worked perfectly well when we had fewer hives, but as Buzz & Bloom grew, so did the number of frames we had to process! We recently invested in an uncapping machine, which has revolutionised the extraction process for us. It removes the wax cappings much more quickly, allowing us to process considerably more frames while still keeping the process here in our own extraction facility.
You can see it in action in the video below, featuring beekeeper Rich Williamson in our extraction unit.
Spinning out the honey
Once the frames have been uncapped, they're placed into an agitator. This helps to loosen the honey from the comb before the frames move on to the extractor.
This is particularly useful when we're processing our heather honey, which has a naturally thicker consistency than other types of honey and can therefore be more difficult to extract.
Next comes one of the most satisfying parts of the process: extraction. The prepared frames are placed into our honey extractor, which spins them at high speed. Centrifugal force draws the honey out of the honeycomb, allowing it to collect in the bottom of the extractor. There are no additives involved, just a mechanical process to separate the honey from the comb.
From extractor to jar
Once extracted, the liquid honey is strained to remove small particles of wax left behind. We don't pasteurise our honey, instead we allow it to settle before jarring it ourselves in small batches. Each jar is then labelled and ready to be sold.
It's a relatively simple process, but there's a lot of work behind every jar!